This is a digital software license download that enables real-time configuration of Canon C70*, C80, C300mkIII, C400, and C500mkII cameras. Update your monitor to the latest firmware in order to use Canon Camera Control.

*C70 requires a USB-C to Ethernet adapter.

View your shot, control your settings, and dive into camera menus from our award-winning PageOS software platform. Save time and effort by adjusting your Canon camera settings right from your SmallHD monitor.

• Adjust Shutter Speed, Aperture, ISO, ND, Codec, and trigger record Start/Stop
• Touch to Focus Compatibility
• Navigate through the camera deep menu UI

For step-by-step activation instructions, click here.

Supported Monitors

• Cine 5
• Ultra 5 / Ultra 5 RX / Ultra 5 TX
• Cine 7 / Cine 7 500 RX / Cine 7 500 TX / Cine 7 SK Rx
• Ultra 7 / Ultra 7 RX (750 & 1500) / Ultra 7 TX (750 & 1500)
• Ultra 10 / Ultra 10 RX
• Cine 13
• Cine 18
• Cine 24
• Vision 17
• Vision 24
• OLED 22
• OLED 27
• Quantum 27
• Quantum 32

Connecting Camera Control Walkthrough (by camera model)

• C300 Mark III / C500 Mark II
• C400
• C70
• C80

For a specific hardware connection breakdown for each compatible monitor click here.

Connection & Adapter Requirements

Some USB-C to Ethernet adapters may not work with C70 Camera Control. If you already own an adapter and it is not working, please use one of the following tested and approved adapters: USB-C to Gigabit Ethernet Adapter | Belkin US

If using direct connection you will need: Ethernet cable with RJ45 connectors on both ends.

If using a direct ethernet connection with C300mkIII/C500mkII, you will need a Canon EU-V1, EU-V2, or EU-V3 Expansion Unit.

If you are using a direct ethernet connection to Cine 5, you will need a 5-Pin USB to Ethernet Adapter .

If you are using a WiFi connection on C300mkIII/C500mkII you will need WFT-E9A. If using a 5" or 7" monitor for WiFi connection you will need a third party adapter and Locking Connector to USB Adapter Cable (4K Production Monitors have USB already, which can be used for a 3rd party WiFi adapter).

If you are using this adapter with Cine 7 you will also need Micro USB to 5-pin Adapter.

Disclaimers

• Once any camera control is registered in your SmallHD monitor, it cannot be removed or transferred to a different monitor.
• Canon’s protocol does not allow playback with camera control.